ENGINE / TRANSAXLE. ENGINE PARTS. 3. 0 liter.. 2024 Audi S4 3.0L V6 A/T Prestige Sedan

3.0 LITER. Vibration damper. Engine Crankshaft Pulley. Engine Harmonic Balancer. From 10/10/2018. Incl.Engine Harmonic Balancer. Part has related component that cannot be reused/reinstalled; bolt. To 10/10/2018.

3.0 LITER. Vibration damper bolt.

3.0 LITER. Lower oil pan.

3.0 LITER. Lower oil pan sealer. Engine Sealant. Included: with Valve Cover. Liquid Gasket. Multi-Purpose Adhesive. Use Silicone Sealant For Model Years 2012-15. Cylinder head. Drain plug. Engine Block Sealing Compound. Flange. Multi - Purpose Adhesive. RTV. Sealant. Timing case. Valve Gasket. Water inlet tube.

3.0 LITER.

3.0 LITER. A flat disc with a hole in the center that is placed between the power steeRing return line and the steeRing gear to provide a seal to prevent the escape of power steeRing fluid. Engine Coolant Temperature Sensor O-Ring. Engine Oil Drain Plug Gasket. From 04/01/2016. From Chassis/VIN 8DX200000. Included in water pump assembly. Location-Engine Coolant Outlet Flange. Power SteeRing Hose O-Ring. Power SteeRing Pressure Line Washer. To 06/19/2017. To Chassis/VIN 8DX199999. Engine Coolant Temperature Sensor Seal. Engine Oil Pan Drain Plug Gasket. Power Stee Return Hose. Pressure line ASSEMBLY. Pressure pipe. Sealing. Temperature Sensor o -. Included with: Lower Oil Pan, Lower Oil Pan Part cannot be reused/reinstalled, Oil Pan, Pressure Hose.

3.0 LITER.

3.0 LITER. Upper oil pan sealer. Engine Sealant. Included: with Valve Cover. Liquid Gasket. Multi-Purpose Adhesive. Use Silicone Sealant For Model Years 2012-15. Cylinder head. Drain plug. Engine Block Sealing Compound. Flange. Multi - Purpose Adhesive. RTV. Sealant. Timing case. Valve Gasket. Water inlet tube.

3.0 LITER. from 02/15/2022. Oil inlet tube. A combination of the oil pump pickup tube and the pickup tube screen. Engine Oil Pump Pickup Tube. From 02/15/2022. Incl.Engine Oil Pump Screen. Part has components that cannot be reused/reinstalled; o-ring, gasket and seal. Part has related component that cannot be reused/reinstalled; o-ring. Part has related components that cannot be reused/reinstalled; o-ring and gasket. Engine Oil Pump Pickup Tube and Screen. Intake connector. Intake duct. INTAKE PIPE. MANIFOLD. Oil inlet tube. OIL PICK - UP.

3.0 LITER. Oil filter hsng.

3.0 LITER. Oil filter hsng gasket. Engine Oil Filter Adapter Gasket. Engine Oil Filter Housing Gasket. Included with: Oil Filter Housing, Oil Filter Housing Part cannot be reused/reinstalled.

3.0 LITER.

3.0 LITER. Engine Oil Filter Housing Cover. Cover cap. Engine Oil Filter Housing Cover. Filter case. Included with: Oil Filter Housing, Oil Filter Housing Part cannot be reused/reinstalled.

3.0 LITER.

3.0 LITER. Gasket for coolant system. Gasket For Oil Cooler. Part cannot be reused/reinstalled. Engine Coolant Pipe Gasket. Engine Oil Cooler Gasket. Water feed tube gasket. Water inlet tube gasket.

3.0 LITER. Oil cooler bolt. A Bolt used to attach the Drive Motor Battery Pack Charger to its mounting point. A Bolt used to secure the automatic transmission Oil cooler control valve to its mounting point. A fastener which secures the Liftgate Bumper to it's mounting point. A rubber ring with a hole in the center which provides protection through which another component can pass through. A screw used to secure the Suspension Control Arm to its mounting surface. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Air Injection System Line to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Automatic Trans Shift Cable to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Liftgate Wedge to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Radiator Support Panel Reinforcement to a mounting point. A/C ExPansion Valve Bolt. Accessory Drive Belt Idler Pulley Bolt. Automatic Transmission Oil Cooler Bolt. Automatic Transmission Oil Cooler Hose Banjo Bolt. Bolt for the brackets that hold the Radiator Hose. Bolt hat secures the Air Bag Impact Sensor. Door Mirror Housing Bolt. Engine Camshaft Position Sensor Bolt. Engine Coolant Pipe Bolt. Engine Coolant Thermostat Housing Bolt. Engine Oil Cooler Bolt. Engine Water Pump Bolt. Exhaust Gas Recirculation (EGR) Valve Bolt. Fastens the dipstick Tube to the Engine. Part cannot be reused/reinstalled. Part inclued with Water Pump assembly. Secondary Air Injection Pump Bolt. TurboCharger Oil Line Bolt. Included with: Battery Charger, Charging port, Cylinder head, Housing assembly, TurboCharger, Water Pump, Water Pump assembly.

3.0 LITER. Check valve. A removable plug which allows the engine oil filter housing to be drained. Engine Oil Pump Relief Valve. CHECK VALVE. Engine Oil Filter Housing Drain Plug. Engine Oil Pump Relief Valve. Oil filter hsng valve ASSEMBLY. Included with: Oil filter housing.

3.0 LITER. Oil tube.

3.0 LITER. Oil tube o-ring. Dipstick Tube. Engine Oil Dipstick O-Ring. Engine Oil Dipstick Tube O-Ring. Engine Oil Dipstick Tube Seal. Part cannot be reused/reinstalled. Part included in tube. Engine Oil Dipstick O - Ring. Engine Oil Dipstick Tube O - Ring. Engine Oil Dipstick Tube Seal. Guide tube o - ring. Oil tube o - ring. SEAL RING. Included with: Oil tube, Tube, Tube Part cannot be reused/reinstalled.

3.0 LITER. Plug. Engine Oil Dipstick Tube Cap. Engine Oil Dipstick. Part has components that cannot be reused/reinstalled; o-ring, gasket and seal. Part has related component that cannot be reused/reinstalled; o-ring and bolt. Part has related component that cannot be reused/reinstalled; o-ring, gasket and seal. Part included in Tube assembly. Engine Oil Dipstick Tube Cap. LOCK PIN. Plug. Included with: Tube assembly.

Intake manifold. Left.3.0 LITER.

Intake manifold. Right.3.0 LITER.

Left.3.0 LITER. Right.3.0 LITER.

3.0 LITER. Upper oil pan.